Remove the floorhead from the vacuum.. Use a coin to unlock the brush bar and slide it out of the floorhead.. Run scissors along the groove in the brush bar and cut away tangled hair.. Use a dry cloth to wipe the inside of the floorhead.

You can also spin it manually to inspect the brush from different angles..If the brush is damaged, then you’ll need to replace it.

This is a simple task on most vacuums, although you’ll need to find the correct brush for your make and model.. 4.Replace a Faulty Brush Roll Motor.Once you’ve ruled out a physical obstruction, tangle, or a broken drive belt, the next most likely problem is a faulty brush roll motor..

This is a more difficult and costly repair, as the motor will need to be replaced by a professional..If you suspect that the brush roll motor is broken, then we recommend either contacting the brand’s customer service department or taking the vac to a local repair shop.. Summary.

A vacuum’s brush bar agitates carpet fibres to remove more dirt and dust.

If the bar isn’t spinning correctly, you’ll probably notice a significant decrease in cleaning performance..Musty smells are often caused by water problems which lead to the carpet sitting wet for a while.

You need to fix the leak or water issue first before tending to your carpet..When you’re ready, here are some simple steps to.

fix a musty carpet.Let the carpet dry completely, then vacuum.. Use a vinegar and water solution to mist the carpet and leave it for a few hours..